 |
|
Product Details:
Payment & Shipping Terms:
|
| Product Name: | Multilayer FR4 PCB Board | Min. Line Width / Spacing: | 4/7mil |
|---|---|---|---|
| Board Thickness: | 1.62mm | Packing: | Vacuum Packing With Carton Box |
| Shipping Method: | Express And Seashipment | Surface Finish: | HASL, Immersio Silver/Gold |
| Smallest Hole: | 0.25mm | Standards: | IPC-A-610 D/IPC-III Standard |
| Payment Method: | Paypal, TT, ACH(US Only) | ||
| High Light: | fr4 printed circuit board,communication pcb |
||
Customized FR4 4 Layer Multilayer PCB Board Peelable Mask Electronic PCB
Founded in 1998, Linked Electronics specializes in 2-32Layers PCB prototype fabrication and small-volume production. At our facility, linked has very strict manufacturing standards, such as advanced production technology, high quality raw materials, strict standardization of operating standards and QC standards for incoming and outgoing materials.
This is peelable mask PCB, our peelable mask is Germany brand Peters, which has very good performance, and easy to peel off after assembly.
1. PCB Reverse Engineering
2. PCB drawing / design according to your schematic diagram
3. PCB manufacturing
4. Component sourcing
5. PCB Assembly
6. PCBA 100% test
Linked Electronics looks forward to working with you and if you have any questions, contact our sales team today, sales@linked-elec.com
| OEM/ODM Services: | |||
| Layers | 1-32 layers | Min. line width | 2mil |
|
Max.board size (single&doule sided) |
700*1200mm | Min.annular ring width: vias | 3mil |
| Surface finish |
HAL(with Pb free),plated Ni/Au, Immersion silver,Imm Ni/Au,Imm Sn, hard gold,OSP,ect |
Min.board thickness(multilayer) | 4layers:0.4mm;
6layers:0.6mm;
8layers:1mm;
10layers:1.2mm
|
| Board materials |
FR-4; high Tg; high CTI; halogen free; high frequency(rogers,taconic, PTFE,nelcon, ISOLA,polyclad 370 HR); thick copper |
Plating thickness (Technique: Immersion Ni/Au) |
Plating type: Imm Ni, Min./Max thickness:100/150U'' Plating type: Imm Au, Min./Max thickness:2/4U'' |
| Impedance control | ± 10% |
Distance between line to board edge |
Outline: 0.2mm V-CUT: 0.4mm |
|
Base copper thickness(Inner and outer layer) |
Min. thickness:1/3 OZ Max.thickness:6OZ | Min.hole size(board thickness ≥2mm) | Aspect ratio≤16 |
| Finished copper thickness | Outer layers:
Min.thickness 1 OZ,
Max.thickness 10 OZ
Inner layers:
Min.thickness 0.5OZ,
Max.thickness 6 OZ
|
Max.board thickness(single&doule sided) | 6mm |
PCB or PCBA Files Requsted for RFQ at Linked Electronics Co., Limited
1. Gerber files of the bare PCB board
2. BOM (Bill of material) for assembly (To short the lead time, please kindly advise us if there is any acceptable components substitution.)
3. Testing Guide & Test Fixtures if necessary
4. Programming files & Programming tool if necessary
5. Schematic if necessary
Contact Person: Mr. Jonathan
Tel: +86 755 2553 8256
Fax: 86-755-61658416
