 |
|
Product Details:
Payment & Shipping Terms:
|
| Product Name: | 4 Layer TG130 PCB | Board Thickness: | 1.6mm |
|---|---|---|---|
| Surface Finish: | HASL, Immersio Silver/Gold | Smallest Hole: | 0.25mm |
| Standards: | IPC-A-610 D/IPC-III Standard | Payment Method: | Paypal, TT, ACH, Fedwire(US Only), SEPA |
| Key Word: | PCB Manufacture In China | ||
| High Light: | fr4 printed circuit board,communication pcb |
||
OEM Rigid FR4 PCB Board SMT LED Aluminum Printed Circuits 4 Layer 70um Copper
Founded in 1998, Linked Electronics specializes in 2-32Layers PCB prototype fabrication, quick turn and high-mixed PCB production. At our facility, linked has very strict manufacturing standards, such as advanced production technology, high quality raw materials, strict standardization of operating standards and QC standards for incoming and outgoing materials.
No matter what type of PCBs, single sided PCB, double sided PCB or multilayer PCB, they have to go through similar quality inspection methods and process. Quality inspection for PCB boards usually includes visual inspection, general electrical test, general technological performance inspection and metalized via inspection. All PCBs produced by Linked Electronics are 100% e-test.
With the inspection report, a solder sample and micro section report will be sent along with the PCBs. A solder sample is non-usable board that represents a usable PCB during test processes. It can be used to test virtually every process on the assembly line.
IPC-1752 RoHS Materials Declaration Standard
Rohs Compliance requires that Linked Electronics and all our raw materials suppliers understand the material composition of our products—from FR4 substrate, solder mask, silkscreen, copper ball, chemicals, to surface finish and finished boards will meet Rohs Compliant.
1. PCB Reverse Engineering
2. PCB drawing / design according to your schematic diagram
3. PCB manufacturing
4. Component sourcing
5. PCB Assembly and SMT service
6. PCBA 100% test
Linked Electronics looks forward to working with you and if you have any PCB or PCB SMT questions, contact our sales team today, sales@linked-elec.com
Lead Time of PCB Production
| Layer | Prototype |
Mass Productions (above 30 m2 ) |
|
| Quick Turn | Standard Time | ||
| 2 | 24 hours | 3-4 days | 8-10 days |
| 4 | 48 hours | 5-6 days | 10-12 days |
| 6 | 72 hours | 6-8 days | 12-14 days |
| 8 | 96 hours | 8-10 days | 14-16 days |
| 10 | 120 hours | 12-14 days | 16-18 days |
| ... | ... | ... | ... |
| PCB Manufacturing Services Capability | |||
| Layers | 1-32 layers | Min. line width | 2mil |
|
Max.board size (single&doule sided) |
700*1200mm | Min.annular ring width: vias | 3mil |
| Surface finish |
HAL(with Pb free),plated Ni/Au, Immersion silver,Imm Ni/Au,Imm Sn, hard gold,OSP,ect |
Min.board thickness(multilayer) | 4layers:0.4mm;
6layers:0.6mm;
8layers:1mm;
10layers:1.2mm
|
| Board materials |
FR-4; high Tg; high CTI; halogen free; high frequency(rogers,taconic, PTFE,nelcon, ISOLA,polyclad 370 HR); thick copper |
Plating thickness (Technique: Immersion Ni/Au) |
Plating type: Imm Ni, Min./Max thickness:100/150U'' Plating type: Imm Au, Min./Max thickness:2/4U'' |
| Impedance control | ± 10% |
Distance between line to board edge |
Outline: 0.2mm V-CUT: 0.4mm |
|
Base copper thickness(Inner and outer layer) |
Min. thickness:1/3 OZ Max.thickness:6OZ | Min.hole size(board thickness ≥2mm) | Aspect ratio≤16 |
| Finished copper thickness | Outer layers:
Min.thickness 1 OZ,
Max.thickness 10 OZ
Inner layers:
Min.thickness 0.5OZ,
Max.thickness 6 OZ
|
Max.board thickness(single&doule sided) | 6mm |
FAQ for PCB Fabrication
Q: What files do you use in PCBA fabrication?
A: Gerber or Eagle, BOM listing, PNP and Components Position
Q:Is it possible you could offer sample?
A: Yes, we can make you a sample to test before mass production
Q: When will I get the quotation after sent enquiry?
A: 4 hours for PCB quotation and PCBA quotation will be ready in 2 working days.
Q: What is the standar lead time of PCBA production at Linked Electronics?
A: 7-10 days for PCB production and components purchasing, and 10 days for PCB assembly and Testing
Q: What does Linked Electronics does to ensure the quality of my PCBAs?
A: We ensure that each piece of PCBA products work well before shipping. All of them will be tested according to your test procedure. Also if there are any defect items during the shipping, free repairation work will be offered for free of charge.
Contact Person: Mr. Jonathan
Tel: +86 755 2553 8256
Fax: 86-755-61658416
