When we say SMT stencils, it refers to the mold that used for PCB assembly or SMT. There are SMT stencils or glue-in stencils which are laser-cut solder paste stencils permanently mounted in a stencil frame using a mesh border to tightly stretch the stencil foil taut in the frame.
Classification of stencils
1.Non electro-polished Laser cut stencils.
This stencil is the most common used in PCB assembly industry. This kind of stencil can be in high precision and cost will be not expensive. If there’s non BGA or QFP package, this one can be used for most PCB boards.
2.Electro-polished laser cut stencils.
Electro-polished stencil, also know as electrochemical deburring stencil is used for fine pitch.
If there is BGA or QFP package, it is better to use this one instead of laser cut stencils. Using electropolishing elicits a significant improvement in printing, particularly for very small pad apertures, as solder paste is distributed better thanks to the smoothed walls.
3.Step SMT stencils
Step-up and step-down stencils have been used in PCB industry for more than a decade. This is really helpful for integrating mixed components with different paste requirements onto a single PCB. Linked Electronics can make a step-up and step-down stencils with many different thickness onto one stencil, that is 0.08mm 0.1mm 0.12mm 0.15mm 0.2mm 0.25mm 0.3mm.
4.Nano coating stencil
Electronics devices is getting much smaller and more dedicated and many new package are now appear, BGA COB, which has the pin space less than 0.4mm. This is really a big challenge for the PCB assembly.And the traditional technique cannot meet the requirement. Thanks to the nano coating stencils made by Linked Electronics
It increases paste transfer efficiency. NanoSlic Gold is applied using a proprietary application process, thermally cured and bonded to the stencil surface and aperture walls. For nano coating stencils, less clean job required and greatly reduce the quality issue for the PCB assembly work.
Product Details:
Payment & Shipping Terms:
|
Product Name: | Laser Cut Stainless Steel Stencil | Size: | 37*47CM |
---|---|---|---|
Thickness: | 0.15mm | Lead Time: | 1 Day |
Material: | 304 Stainless Steel | Name: | SMT Stencil |
High Light: | pcb solder stencil,stencil for pcb assembly |
37cm*47cm Custom Framed SMT Stencil for PCB Board Assembly/PCBA High Quality
Framed SMT Stencils are designed for high volume screen printing on printed circuit boards. These SMT stencils otherwise known as "glue-in" stencils are laser cut solder paste stencils permanently mounted in a stencil frame using a mesh border to tightly stretch the foil into the frame. At Linked Electronics, you can always trust us for good quality, excellent customer service and on time deliver
Linked Electronics Co., Limited One Stop PCB Service
1. PCB manufacturing
2. Components Souring
3. PCB Assembly Service
4. SMT Stencil
At Linked Electronics, you have several option for you stencils with different sizes.
a. aluminum framed stencil
b. frameless smt stencil
c. meshed aluminum framed stencil
d. nano coating framed stencil
Look forward to your RFQs and hope we can work together.
FAQ
Q1.What is needed for quotation?
PCB: Quantity, Gerber file and Technical requirements(material,surface finish treatment, copper thickness,board thickness ,...)
PCBA: PCB information, BOM, (Testing documents...)
Q2. What file formats do you accept for production?
Gerber file: CAM350 RS274X
PCB file: Protel 99SE, P-CAD 2001 PCB
BOM: Excel (PDF,word,txt)
Q3. MOQ?
There is no MOQ at Linked Electronics. We specializing in prototying to middle volume PCBs.
Q4.Shipping cost?
The shipping cost is determined by the destination, weight, packing size of the goods. Shipping cost will be quoted based on your RFQ.
Opening Hole Design for Stencil
Component Type | Pitch | Soldering Width | Soldering Length | Opening Width | Opening Length | Shim Thickness |
PLCC | 1.27mm | 0.65mm | 2.00mm | 0.60mm | 1.95mm | 0.15-0.25mm |
QFP | 0.635mm | 0.35mm | 1.50mm | 0.32mm | 1.45mm | 0.15-0.18mm |
QFP | 0.50mm | 0.254-0.33mm | 1.25mm | 0.22-0.25mm | 1.20mm | 0.12-0.15mm |
QFP | 0.40mm | 0.25mm | 1.25mm | 0.20mm | 1.20mm | 0.10-0.12mm |
QFP | 0.30mm | 0.20mm | 1.00mm | 0.15mm | 0.95mm | 0.07-0.12mm |
0402 | 0.50mm | 0.65mm | 0.45mm | 0.60mm | 0.12-0.15mm | |
0201 | 0.25mm | 0.40mm | 0.23mm | 0.35mm | 0.07-0.12mm | |
BGA | 1.27mm | 0.80mm | 0.75mm | 0.75mm | 0.15-0.20mm | |
BGA | 1.00mm | 0.38mm | 0.35mm | 0.35mm | 0.10-0.12mm | |
BGA | 0.50mm | 0.30mm | 0.28mm | 0.28mm | 0.07-0.12mm | |
Flip Chip | 0.25mm | 0.12mm | 0.12mm | 0.12mm | 0.12mm | 0.08-0.10mm |
Flip Chip | 0.20mm | 0.10mm | 0.10mm | 0.10mm | 0.10mm | 0.05-0.10mm |
More Pictures of Laser Cut Stencil
Contact Person: Mr. Jonathan
Tel: +86 755 2553 8256
Fax: 86-755-61658416