HDI PCB Boards By Definition at Linked Electronics
High Density Interconnect. HDI boards, one of the widely used technologies in PCBs especially in
mobile phones, touch-screen devices, laptop computers, digital cameras and 5G network communication industries, are now available at Linked Electronics . HDI Boards contain blind and/or buried vias and often contain microvias of . 006 or less in diameter. They have a higher circuitry density than traditional circuit boards. HDI Electronic PCB can also reduce the weight and overall dimensions of products, as well as to enhance the electrical performance of the electronic device.
Over the last two decades in PCB fabrication period, Linked Electronics has established a good reputation for manufacturing PCBs of the highest quality. Our custom PCB manufacturing capabilities enable you to get the finest quality HDI PCBs at competitive prices without MOQ requirement. We also have an consistant good quality control department to verify the finished product meet your high quality standards.
Product Details:
Payment & Shipping Terms:
|
Product Name: | HDI Multilayer Circuit Board Pcb | Smallest Hole: | 0.1mm |
---|---|---|---|
Testing Service: | 100% E-test | Application: | Communication, Military |
Material: | FR4 TG170 | Surface Finish: | Immersion Gold |
High Light: | hdi pcb prototype,hdi printed circuit boards |
6L HDI Printed Circuit Board, Lead Free 0.1mm Dril Holes FR4 Material
Linked Electronics is a China based PCB manufacturer with full in house manufacturing capabilities. We have been in business since 1998 specializing in quick turn, high quality custom PCB fabrication. For more than a decade Linked has been a leading PCB manufacturer in China specializing in Quick-turn Printed Circuit Boards.
Our Capability
Item | Capability | Remark | ||
Layer count | 2~30 layer | |||
Lamination | FR-4,Aluminum Based,Copper based,High frequency plate,Heavy copper,BT,Rogers,PTFE ect | |||
Thickness (THK) | 0.2mm≤THK≤6.0mm | |||
Smallest hole (mm) | 0.15mm | |||
Aspect Ratio | 13:1 | |||
Max dimension | Single or 2-layer | 600 x 1000 mm | ||
Multi-lyr | ≤6L | 600 x 900 mm | ||
≥8L | 500 x 600 mm | |||
Gold THK | Hard Gold (u") | 50u" | ||
Immersion Gold (u") | 4u" | |||
Copper THK | Outer (oz) | 6oz | ||
Inner (oz) | 6oz | |||
Smallest trace width / space (mil) | 3/3 mil | |||
Annual ring | Via hole | 3mil | ||
Component hole | 6mil | |||
Copper to edge spacing | 0.25mm | |||
Min trace width / space (mil) | Base Copper (oz) | Min trace width / space (mil) | ||
0.5 | 3/3 | |||
1 | 4/4 | |||
2 | 5/5 | |||
3 | 7/7 | |||
5 | 9/9 |
Contact Person: Mr. Jonathan
Tel: +86 755 2553 8256
Fax: 86-755-61658416