 |
|
Printed Circuit Board is the fundamental for all electronics products. So it is the same for automotive industry.
For a traditional fuel vehicle, the components cost possess 15% of the total cost and for a Battery Electric Vehicles (BEVs), the cost of components is as much as 47%. In other words, an electric car requires more PCB boards.
According to survey carried out by Verified Market Research, Global Automotive PCB Market was valued at USD 7.81 Billion in 2018 and is going to reach USD 11.85 Billion by 2026, growing at a CAGR of 5.30% from 2019 to 2026.
Types of Automotive PCBs
There are 5 main types of automotive PCB boards which has very demanding acceptance criteria as instructed by TS16949, and Linked Electronics perform TS16949 for all automotive PCB boards.
Flex PCBs – These boards are made of flexible plastic substrates. They are composed of PEEK, polyamide, or transparent polyester films.
Flex PCB boards made by Linked Electronics will allow engineers to use flexible forms and shapes, light in weight and size is smaller
Rigid PCBs – The rigid boards are made of FR4 that is traditional PCB boards which are mostly used in display monitors, radar and reverse cam screens.
Rigid-Flex PCBs – These are circuit boards are a combination of Rigid and Flexible boards. Those boards can be found in lighting systems.
Aluminum PCBs – The boards made of aluminum substrate are used for LED since they require heat dissipation. Aluminum PCB boards are used in car indicators, headlights, and brake lights.
HDI PCB boards– These boards feature much higher wire densit, finer lines and spaces, and high pad connection density. The HDI PCB boards by Linked Electronics accommodate more components in the same area than other PCBs and play a prominent role in miniaturization. These boards are widely used in car entertainment systems.
Product Details:
Payment & Shipping Terms:
|
| Production Name: | Automotive PCB Board | Material: | FR4 TG180 |
|---|---|---|---|
| Minimum Hole: | 0.2mm, 0.15mm | Soldermask: | Green, Black, Yellow, White |
| Application: | Automotive Industry | Copper Weight: | 0.5OZ~6OZ |
| High Light: | rohs compliant pcb,two layer pcb |
||
Automotive PCB Printed Circuit Board, Rohs compliant TS16949 Certificate
Linked Electronics is a China based PCB manufacturer with full in house manufacturing capabilities.
We specialized in high-mix, prototype, low volume and quick turn PCBs.
Our Capability
| Item | Capability | Remark | ||
| Layer count | 2~30 layer | |||
| Lamination | FR-4,Aluminum Based,Copper based,High frequency plate,Heavy copper,BT,Rogers,PTFE ect | |||
| Thickness (THK) | 0.2mm≤THK≤6.0mm | |||
| Smallest hole (mm) | 0.15mm | |||
| Aspect Ratio | 13:1 | |||
| Max dimension | Single or 2-layer | 600 x 1000 mm | ||
| Multi-lyr | ≤6L | 600 x 900 mm | ||
| ≥8L | 500 x 600 mm | |||
| Gold THK | Hard Gold (u") | 50u" | ||
| Immersion Gold (u") | 4u" | |||
| Copper THK | Outer (oz) | 6oz | ||
| Inner (oz) | 6oz | |||
| Smallest trace width / space (mil) | 3/3 mil | |||
| Annual ring | Via hole | 3mil | ||
| Component hole | 6mil | |||
| Copper to edge spacing | 0.25mm | |||
| Min trace width / space (mil) | Base Copper (oz) | Min trace width / space (mil) | ||
| 0.5 | 3/3 | |||
| 1 | 4/4 | |||
| 2 | 5/5 | |||
| 3 | 7/7 | |||
| 5 | 9/9 | |||
Our Advantage
1. High Capability and good management
Linked Electronics can meet all your PCB and PCBA manufacturing needs from single-sided to complex multi-layered PCB’s and everything in between. Our stringent quality standards are imposed by our trained staff with traceability of PCB’s throughout the production process. Our Management Team has over 15+ years experience which ensures we get the job done right.
2.Fast Lead time
Linked Electronics have a consistent on–time shipping record and we are now shipping many of our orders early!
3. Quick Turn-around Service
Prototype of 2 Layer can be finished within the working day, and 4 layer in 48 hours at Linked Electronics.
4. Good Service
At Linked we are committed to giving you personal Customer EXCELLENCE not just Customer Service! When you call, we answer. When you email, we respond.
5. Free Sample
For first time customers can receive first prototype for free by some restrictions applies. You will not be anxious about the potential risk because of initial cooperation.
6. No MOV
Linked Electronics don’t have any minimum lot requirements, so you never have to buy more than what you need.
Contact Person: Mr. Jonathan
Tel: +86 755 2553 8256
Fax: 86-755-61658416
