The Definition of PCB Assembly
Electronic PCB assembly is the process of mouting the electronic components with the wirings of printed circuit boards. The traces or conductive pathways engraved in the laminated copper sheets of PCBs are used within a non-conductive substrate in order to form the assembly.
The Cost of PCB Assembly at Linked Electronics
However, most PCB assembly unit costs range between $10 and $50 depending on the number of units produced that you produced at Linked Electronics.
PCB Assembly Process at Linked Electronics
Step 1: Solder Paste Stenciling. The first step of PCB assembly is applying a solder paste onto the PCB board
Step 2: Pick and Place.
Step 3: Reflow Soldering.
Step 4: Inspection and QC.
Step 6: Final Inspection and Functional Test.
Payment & Shipping Terms:
|Product Name:||PCB||Material:||FR4 TG130|
|Minimum Hole Size:||0.2mm||Application:||Data Logger|
smt electronics manufacturing,
|Layer count||2~30 layer|
|Lamination||FR-4,Aluminum Based,Copper based,High frequency plate,Heavy copper,BT,Rogers,PTFE ect|
|Smallest hole (mm)||0.15mm|
|Max dimension||Single or 2-layer||600 x 1000 mm|
|Multi-lyr||≤6L||600 x 900 mm|
|≥8L||500 x 600 mm|
|Gold THK||Hard Gold (u")||50u"|
|Immersion Gold (u")||4u"|
|Copper THK||Outer (oz)||6oz|
|Smallest trace width / space (mil)||3/3 mil|
|Annual ring||Via hole||3mil|
|Copper to edge spacing||0.25mm|
|Min trace width / space (mil)||Base Copper (oz)||Min trace width / space (mil)|
1. High Capability and good management
Linked Electronics can meet all your PCB and PCBA manufacturing needs from single-sided to complex multi-layered PCB’s and everything in between. Our stringent quality standards are imposed by our trained staff with traceability of PCB’s throughout the production process. Our Management Team has over 15+ years experience which ensures we get the job done right.
2.Fast Lead time
Linked Electronics have a consistent on–time shipping record and we are now shipping many of our orders early!
3. Quick Turn-around Service
Prototype of 2 Layer can be finished within the working day, and 4 layer in 48 hours at Linked Electronics.
4. Good Service
At Linked we are committed to giving you personal Customer EXCELLENCE not just Customer Service! When you call, we answer. When you email, we respond.
5. Free Sample
For first time customers can receive first prototype for free by some restrictions applies. You will not be anxious about the potential risk because of initial cooperation.
6. No MOV
Linked Electronics don’t have any minimum lot requirements, so you never have to buy more than what you need.
Contact Person: Mr. Jonathan
Tel: +86 755 2553 8256